5
1.
Assemble wheels by pushing wheels into
mounting holes, as shown in Figure 1.
2.
Insert handle into back of unit at an angle,
as shown in Figure 2.
3.
While pressing down on handle, push
handle fully forward, as shown in Figure
3.
4.
Attach handle to unit with enclosed screw,
as shown in Figure 4.
G A R D E N H O S E C O N N E C T I O N
INSTRUCTIONS
1.
Attach nipple adapter to inlet fitting on
the unit (this may already be attached to
the pump).
2.
Attach quick connect fitting to garden
hose.
3.
Pull side “A” of quick connect fitting
towards garden hose and push onto
nipple adapter.
4.
Push side “A” of quick connect fitting
towards nipple adapter and release.
1.
Plug the power cord into a grounded
120V outlet and press the reset button
as shown in Figure 6.
2.
THIS MUST BE DONE EACH TIME THE
UNIT IS PLUGGED IN AN OUTLET.
Assembly Instructions (Continued)
Figure 1
Figure 2
Figure 4
Figure 3
Figure 6 - Grounded plug/reset button
Reset
Garden Hose Connection
Figure 5 - Garden Hose Connection
“A”
Quick Connect Fitting
Garden Hose
Nipple
Adapter
Power Cord
Pressure Washer
Summary of Contents for pw0501400
Page 14: ...14 NOTES Pressure Washer...
