Powermate CX1400, Owner'S Manual

Page: 9 / 24

Owner’s Manual for Portable Generator 7
110/120 VAC, 30 Amp Receptacle
Use a NEMA L5-30 plug with this receptacle
(rotate to lock/unlock). Connect a suitable 3-
wire cord set to the plug and to desired load.
The cord set should be rated for 125 Volts AC
at 30 Amps (or greater). See Figure 2-9 .
Use this receptacle to operate 120 Volt AC,
60Hz, single phase loads requiring up to 3600
watts (3.6kW) of power at 30 Amps. The outlet
is protected by a 30 Amp push-to-reset circuit
breaker.
Figure 2-9. 120 VAC, 30 Amp Receptacle
NEMA L5-30
Remove Contents from Carton
1. Open carton completely by cutting each
corner from top to bottom.
2. Remove and verify carton contents prior to
assembly. Carton contents should contain
the following:
TABLE 2. Accessories
3. Call Powermate Customer Service 1-800-
445-1805 with the unit model and serial
number for any missing carton contents.
4. Record model, serial number, and date of
purchase on front cover of this manual.
Assembly
Call Powermate Customer Service at 1-800-
445-1805 for any assembly issues or con-
cerns. Please have model and serial number
available.
The following tools are required to install the
accessory kit.
• See
Table 2: Accessories (Tool Kit)
NOTE: The wheels are not intended for over-
the-road use.
Item - All Models Qty.
Main Unit 1
Owner’s Manual 1
Liter SAE Oil 1
Oil Funnel 1
Hardware Bag - CX1400 Qty.
Spark Plug Wrench with Rod 1
Battery Cable Set 1
Hardware Bag - CX3500 Qty.
Wheel (1) 2
Axle Pin (2) 2
Cotter Pin (3) 2
Foot Spacer (4) 2
Rubber Feet (5) 2
M10 x 4mm Flat Washer (6) 2
M6 x 25 Bolt (7) 2
000844
M8 x 65 Bolt (8) 2
M6 Nyloc Nut (9) 2
Hardware Bag - CX5500 Qty.
Wheel (1) 2
Handle and Handle Bracket (2) 2
Axle Pin (3) 2
Cotter Pin (4) 2
Foot Spacer (5) 2
Rubber Feet (6) 2
M12 x 4mm Flat Washer (7) 2
M12 x 1.5mm Flat Washer (8) 2
M8 Flat Washer (9) 2
M8 x 50 Bolt (10) 2
M8 x 80 Bolt (11) 2
M8 Nyloc Nut (12) 4
Handle Grip (13) 2
Tool Kit Qty.
5mm Hex Key 1
10 x 13mm Wrench 1
Spark Plug Wrench with Rod 1
(000100a)
WARNING
Consult Manual. Read and understand manual
completely before using product. Failure to
completely understand manual and product
could result in death or serious injury.