15
16
tROUBlesHOOting
Problem
Solution
My electronic device
is not charging
Confirm that you have followed the set-up
instructions and that the Powermat Mat is
properly plugged into an electrical outlet
and the DC plug is inserted into the mat.
Make sure that you have properly
inserted your device into the appropriate
model-specific Powermat Receiver.
Verify that your handheld device is
properly positioned on the Powermat
Mat and that the indicator light is lit,
indicating that a connection has been
made between the Mat and your
enabled device (make sure that the light
is not turned off via the light button on
the rear of the Mat).
Please note that this may also indicate
that the device has been fully charged
and no further charging is needed.
NOTE: Devices that have not been
enabled with a Powermat Receiver will
not activate.
Problem
Solution
The indication light
is not lit
If the indication light fails to glow at
all, a proper connection between the
Powermat Mat and your device has not
been made.
Re-align the center of the Powermat
Receiver with the Power Access Point on
your Powermat Mat until the light glows.
The indication light
is flashing
If the light flashes on and off instead of
emitting a steady glow, the connection is
incomplete. Keep adjusting the position
of your Powermat Receiver until you
see a steady light. When the light emits
a steady glow, proper positioning has
been achieved and charging will begin.
No magnetic lock
Magnetic lock is achieved when the
Powermat receiver and Power Access
Point are properly aligned. Re-align the
Powermat Receiver with the Power
Access Point on your Powermat Mat
until a magnetic lock is achieved.