Brake side:
Attach threaded bent rod to the mirror mount bracket. Attach
mirror mount bracket and threaded bent rod assembly to the
upsweep section of the handle bars. Mount only to the round
section of the bars being careful not to mount where the bars
are bending. See photo 3. Position the duck bill handguard
mount in the center of the threaded area as shown in the
photo 4 and attach the handguard. Adjustments can be made
by spinning the mirror mount bracket on the bars, by turning
the threaded bent rod up or down and by twisting the duck bill
handguard mount. Adjust so the guard is about in the position
shown in the photo and or to your personal preference. Before
and after adjusting handguard check that the brake and
parking brake are operational.
Photo 3
Photo 4
