1.4 Charging the P-CUBE
1.4.1 Recommended charge time
The P-CUBE is supplied partially charged but must be charged fully
before use. This will take 6 hours.
For all further charges, the batteries will be approximately 80%
charged in 1.5 hours, and fully charged in approximately 3 hours. If
you charge the P-CUBE while running other appliances, it will take
substantially longer to reach a full charge.
Note:
The P-CUBE will continue to draw a small amount of power
even when turned off. If the unit isn’t used for some time, it may
require charging before it is next used.
1.4.2 Charging the unit
The charger for the P-CUBE is integral to the inverter - use the
supplied charging lead with a 3 pin plug to charge the unit.
Press the lid of the power cable compartment to release it, remove
the plug and uncoil the cable. The plug can the be plugged into the
nearest wall power outlet. The AC charge LED will glow green when
charging and will glow blue when fully charged.
You can disconnect and use the unit before it is fully charged, but it is
recommended that it be fully charged before use.
5
© 2020 Copyright Powerlogic SA (Pty) Ltd
Rev. 2 15/11/2019 BVZ
innovative power technologies
SA (Pty) Ltd.
P - C U B E
User Manual
WARNING!
Do not connect or disconnect the
charging cable with wet hands.
!
WARNING!
Do not block the ventilation grids. Lack of airflow
through the unit may cause overheating and damage.
!
