14
Symbols used
Standard graphic symbols are used on all Log Splitters for uniform and accurate understanding
of information. This ensures total safety and protection for the users and the Log Splitter Log
Splitter. As these symbols are very important, pay close attention to the information below.
Read the Log Splitter’s operation and maintenance manual in full before using
your Log Splitter.
Always wear safety footwear when operating the Log Splitter. This will provide
protection against possible injury from logs accidentally falling on feet.
Always wear gloves when operating the Log Splitter. This will protect the hands
against chips and splinters, which may be generated during operation.
Always wear goggles/visor when operating the Log Splitter. This protects the
eyes and face from chips and splinters, which may be generated during opera-
tion.
Do not remove or tamper with the protection and safety devices on the Log
Splitter.
Only the person operating the Log Splitter should be within 5 meters of the Log
Splitter when in use. No other person or animal may be present within the 5
meter radius.
Any used oil for disposal from the Log Splitter must not be dumped into the en-
vironment. The disposal of such bi-products must be done in accordance with
current laws in the country where this Log Splitter is used.
Hand hazard area. Do not touch while the wedge is operating as it may cut or
crush your hands.
Warning!
Always pay attention to the movement of the log pusher when operat-
ing the Log Splitter
Warning!
Do not remove a log trapped in the wedge with your hands.
Warning!
Always disconnect the power cord before conducting any inspection
or maintenance operation on the Log Splitter.
Warning!
Use only voltage indicated on the rating plate
