5
FIG047
33
5/16” Nut
Hose Reel
Hose Reel
Mount Bracket
5/16” x 3/4”
HHSF Bolt
Assembly
Note: Remove contents from box and begin assembly.
Hose Reel Mounting Instructions
Kit# 720150
Note: Hand tighten all bolts in assembly steps. Once assembly steps have been completed tighten all nuts with
wrench. Before installation, disconnect pressure washer hose from pump and spray gun.
Step 1: Install Hose Reel Mount Bracket to Base
A.)
First, remove the 4 indicated bolts and nuts from the
pressure washer base. There are two on each
side.
B.)
Align hose reel mount bracket with the
holes that the bolts were removed from.
Insert the (4) bolts and thread (4) nuts onto bolts.
Step 2: Secure Hose Reel onto Hose Reel Bracket
A.)
Align hose reel with the pre-drilled holes on
the hose reel mount bracket. Insert the (4)
bolts and thread (4) nuts onto bolts.
(4) 5/16” x 3/4” HHSF Bolt (82015)
(4) 5/16” Nut (82019)
FIG047
32
Hose Reel Mount
Bracket
Bolt
Base
Nut
Remove (4) bolts, (4) nuts
on sides of the base.
