Maintenance & Repair (cont’d)
38
c)
Remove the oil filler cap 3.
d)
Place an oil pan under the engine. Tilt the generator to drain
the oil completely.
e)
Place generator on a level surface.
f)
Fill with the recommend amount and type of engine oil, then
install and tighten the oil filler cap (See Specification section
for oil type and capacity).
NOTE: DO NOT tilt generator when adding engine oil, this
could result in overfilling and cause damage to the engine.
g)
Install the oil fill cover 2 and tighten the screw 1.
Using a funnel, add oil up to the max oil level with the recommended oil type
for your engine and expected ambient conditions.
(See specification section for oil type and capacity.)
Max oil level
Min oil level
