Maintenance & Repair (cont’d)
44
Draining the Carburetor
a)
Remove the side cover and screws.
b)
Loosen the carburetor drain screw.
c)
Drain fuel into suitable container.
d)
Tighten the carburetor drain screw.
e)
Install side cover 2 and tighten the screws 1.
Check receptacles
Check receptacles before each use to make sure they are not cracked or
broken.
If a receptacle is cracked or otherwise damaged, do not use until replaced
with an authorized factory part. Using cracked or damaged receptacles can
be both dangerous to the operator and destructive to the equipment.
Carburetor
Drain screw
