Powerhorse M1577110E, Owner'S Manual

Page: 46 / 62

46
Battery Connection (Electric-Star Type)
Use a 12 volt battery with an ampere-hour rating of at least 18AH.
1. Connect the battery positive (+) cable to the starter solenoid terminal, as show.
2. Connect the battery negative (-) cable to an engine mounting bolt, frame bolt, or other good engine
ground connection.
3. Check the battery cable connections to be sure the cables are secured and free of corrosion.
Remove any corrosion and coat the terminals and cable ends with grease.
WARNING

The battery may give off explosive gas; keep sparks, flames, and cigarettes away. Charge
or use it in an area with good ventilation.

The battery contains sulfuric acid (electrolyte). Contact with skin or eyes may cause
severe burns. Wear protective clothing and face shield.

If electrolyte gets on your skin, flush with water.

If electrolyte gets in your eyes, flush with water for at least 15 minutes and call a physician
immediately.

Electrolyte is poisonous. If swallowed, drink large quantities of water or milk and follow
with milk of magnesia or vegetable oil and call a physician.

KEEP OUT OF REACH OF CHILDREN.
CAUTION

Be careful not to connect the battery in reverse polarity, as this will short circuit the battery
charging system.