Engine Operation (cont’d)
45
Storage
1.
Replace engine oil.
2.
Disconnect the spark plug. Fill a spoon of fresh engine oil from the spark plug mount
hole into the cylinder. Rotate the engine to distribute engine oil evenly, followed by
fitting the spark plug to original position.
3.
Pull the starting rope slowly until feel a slight anti-action, and then keep pulling so as to
align the arrow of the starting sleeve with the hole of the starter. At this time, both the
inlet and outlet valves are closed so to help prevent the engine inside from rusting.
4.
Cover the engine so keep dust away.
Removal From
Storage
Storage time
Service item
Within one month
Use
One-two months
Drain out original fuel of the fuel tank and refuel
Two months-one
year
Drain out original fuel of the fuel tank and refuel;
Drain out fuel in the carburetor
Empty the deposit cup.
Above one year
Drain out original fuel of the fuel tank and refuel;
Empty the fuel cup in the carburetor
Empty the deposit cup;
Move the engine from the storage place, fill it with
fuel, then start it up.
Screw off the drain plug and drain out fuel in the carburetor.
Turn off the engine switch first, disconnect the deposit cup and empty it.
Note: For the sake of environmental protection, we recommend to fill the
discarded fuel into a closed container and bring to local recycling
station.
Never pour freely.
Summary of Contents for 1661132
Page 2: ...Hazard Signal Word Definitions 2...
Page 48: ...1661132 Engine Parts Rev B 48...
Page 51: ...1661132 Generator Parts Rev B 51...
Page 54: ...Wheel Kit Assembly 54...
