PowerPallet User Manual
Page
17
of
29
Li-Ion Battery Charging
The Li-Ion battery charger includes an external charger block that plugs into the battery cradle.
To charge the battery simply plug the power cord into the charger block, plug the charger block into the
charger base, plug the power cord into a mains circuit and set the battery on the charger base.
The LED indicator light that shows the battery charge status is located on this external battery charger
block.
There are no indicator lights on the Li-Ion charger base.
Green LED indicates:
Charger power connected or battery is fully charged.
Red LED indicates:
Battery is charging.
NiMH Battery Charging
The NiMH battery charger includes an integral control board in the charger base with LED indicator
lights on the charger front panel that indicates the battery charge status.
Green LED indicates:
Charger power connected or battery fully charged.
Red LED indicates:
Battery charging.
Flashing Green LED indicates:
Battery cells over temp (cool battery before recharging) or thermistor circuit error.
Device Operation
This section will detail the following:
Battery Installation and Removal
Power Up/Power Down
Operating Modes
Battery and Motor Temperature Indication
Belly-Stop Braking
Transition between Use States
Parking Brake
Manual Jack Operation
Li-Ion Charger LED Indicator
