GB/MT 33
¡
¡
Only use the same type of batteries /
rechargeable batteries. Do not mix used
and new batteries / rechargeable
batteries.
¡
¡
Remove the batteries / rechargeable
batteries if the product will not be used
for a longer period.
Risk of damage of the product
¡
¡
Only use the specified type of battery /
rechargeable battery!
¡
¡
When inserting ensure the correct
polarity! This is shown inside the battery
compartment!
¡
¡
Clean the contacts on the battery and
in the battery compartment before
inserting!
¡
¡
Remove exhausted batteries /
rechargeable batteries from the product
immediately.
Before start of operation
Insert / replace battery
Tip:
Low voltage symbol showing in the LCD display
3
indicate a discharged / flat battery.
Tip:
When changing the battery, the LCD display
3
may
experience faults. Remove the battery and insert it again.
¡
¡
Push the battery compartment button
4
, and then pull out
the battery receptacle
7
(see fig B).
¡
¡
Remove the old battery.
¡
¡
Insert battery receptacle containing the new battery into the
battery compartment and ensure correct polarity (+ and –).
Make sure that the plus terminal points outwards.
¡
¡
Push the battery receptacle
7
fully in (see Fig. B).
Starting up the device
Using the angle ruler
¡
¡
Press the ON / OFF button
5
to switch the LCD
display
3
on.
¡
¡
Loosen the locking knob
2
by turning it anti-clockwise.