Powerfix Profi 285131, Operation And Safety Notes

Page: 27 / 127

27 GB/IE/NI
Note: Exercise care with the studs.
These are sharp and can cause in-
jury. Do not use the stud button on
stone or metal wall, but only on walls
with a soft surface.
Vertical laser line
1. Attach a thread to the eye at the
measuring point
1
.
2. Hang the product to the point on the
wall where you would like to project
the vertical line. The product hangs
vertically downwards like a plumb
bob. The laser projects a vertical line
on the wall.
Troubleshooting
This product has delicate electronic
components. This means that if it is
placed near an object that transmits
radio signals, it could cause interfer-
ence. If false readings occur, remove
such equipment from the vicinity of
the product.
Electromagnetic interference / high-
frequency emissions can lead to the
product failing. In cases of the product
failing to work, remove the batteries
for a short while and then replace them.
Do this as described in the section
“Inserting / changing the batteries“.