Powerfix Profi 285131, Operation And Safety Notes

Page: 19 / 127

19 GB/IE/NI
- The battery must not be empty. An
empty battery is shown in the display
2
by the battery symbol .
- If a definitive measurement is not possible,
the display shows the „Err“ information.
The measurement must then be repeated.
Addition of distances
With the product you can add the meas-
ured distances together:
1. Measure the first distance as described
in the section „Measuring distances“.
2. Press the + / = button
12
. The mes-
sage „+“ appears in the display
2
and the measured distance in the
row below.
3. Measure the next distance. The new
distance measured is shown in the
upper row of the display.
4. Press the + / = button again. The new
measurement is added to the old in
the lower row.
5. Repeat steps 3 to 4 to add further
measurements.
6. Press the MODE button
4
to leave
the addition mode. All the measure-
ments will be deleted.
Measuring
surface areas
1. Slide the function switch
9
to the
position „DISTANCE“. The display
2
is turned on.