18
PowerFit
®
Elite & PowerFit
®
Elite Deluxe
PowerFit
®
Elite & PowerFit
®
Elite Deluxe
19
Issue
Cause
Fix
The device
does not work.
The Power Cord is not plugged into a power outlet.
Connect the Power Cord to a power outlet.
The Power Switch is in the Off position.
Place the Power Switch in the On position.
The Remote Control
does not work.
The Remote Control’s batteries are dead.
Replace the batteries.
The remote control is too far away from the device
’
s
Infared Receptor.
The effective distance of the Remote Control
is 6.56 feet (2 m).
The machine stopped
working suddenly.
The programmed exercise time ended.
Reset the exercise time.
The device is
not responding.
Too many commands were input at once and
the device cannot respond to all of them.
Turn off the device, wait 1 minute, and turn the device
back on again.
Maintenance & Cleaning
Troubleshooting
Before cleaning the device, make sure that the
Power Switch is off and that the Power Cord is
unplugged from the outlet.
• You can use a dry, clean broom or brush to
sweep dust from device.
• The exercise area can be cleaned with a slightly
wet cloth.
• Do not clean the device with corrosive
substances because they can damage
the device.
• Clean the remote control with a clean cloth.
• If you are not using the device for a long time,
put it in its packaging box and store the box in
a cool, dry place. Remove the batteries from the
remote control.
• If
PowerFit
presents any issues that cannot be
solved using the solutions in the Troubleshooting
section, please contact Customer Service using
the contact information in the back of this manual.
Maintenance & Cleaning
Replacing the Fuse
If the device is plugged in but will not power on,
you may need to replace the fuse:
1.
Use a screwdriver to pry open the fuse holder
in the middle of the socket (see
Fig. A
).
NOTE:
Screwdriver not included.
2.
Remove the fuse from the fuse holder
(see
Fig. B
).
3.
Install a new fuse into the fuse holder
(see
Figs. C
&
D
).
NOTE:
New fuse not included.
4.
Insert the new fuse and holder into the middle
of the switch socket according to the direction
of the notch (see
Figs. E
&
F
).
FUSE HOLDER
FUSE
Fig. A
Fig. C
Fig. D
Fig. E
Fig. F
Fig. B
