V4.0
12 in. High-Velocity Floor Fan
8978637
Visit www.princessauto.com for more information
5
2. Turn power on and adjust the fan speed by
rotating the dial (Fig.1-1). This fan has 3 speeds:
low speed (1), middle speed (2), high-speed (3).
Button (0) switches the fan off.
HEAD ANGLE ADJUSTMENT:
The fan head is attached to its base on the sides. To
direct the air in a specific angle, the fan head angle can
be adjusted by moving the top by hand (Fig. 1-2).
NOTICE: Adjust the fan head angle carefully to avoid
damage.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient, easier to
control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
3. Make sure that the fan is turned off and unplugged before cleaning the
grilles.
4. Unplug the appliance from the power before servicing and cleaning.
5. Clean your appliance with a slightly damp cloth and dry it up with a dry
cloth.
6. Maintain the tool’s labels and name plates. These carry important information.
If unreadable or missing, contact Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws for
electronic devices, batteries, oil or other toxic liquids.
