V1.0
Portable Blower Fan Heater Attachment
8912388
Visit www.princessauto.com for more information
7
ASSEMBLY & INSTALLATION
Letter references in parenthesis (A) refer to the included Identification Key.
1.
Slide the heater unit (A) over the blower fan’s (B) outlet until the spring
clip latches onto the outlet’s attachment point.
2.
Insert the plug (C) into the blower fan’s power outlet while the fan is off.
OPERATION
1.
Start the blower fan, then turn the heater unit on.
2. Turn the heater unit off. Wait several minutes before shutting the
blower fan off.
3.
Unplug the heater unit from the blower fan outlet.
CARE & MAINTENANCE
1.
Maintain the tool with care. A tool in good condition is efficient, easier
to control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when
servicing.
3.
Keep the tool clean, dry and free from oil/grease at all times.
4.
Maintain the tool’s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
CLEANING
Warning! Always unplug and disconnect the heater from blower fan before
cleaning to avoid electricution.
1.
Clean the casing with a moist, soft cloth. Only use mild soap if needed.
2. Clean the screens with a soft bristle brush.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws for
electronic devices, batteries, oil or other toxic liquids.