V4.0
5 Gallon Tire Bead Seater/Blaster
8784738
Visit www.princessauto.com for more information
7
TANK PRESSURE TABLE
This table is a guide for recommended starting pressures. Individual tires may
require higher or lower pressures. Increase pressure if the lire bead seater does
not lift the tire bead far enough. Decrease pressure if the tire bead appears to
seat at first and then falls off again.
VEHICLE
TYPE
TIRE TYPE
EXAMPLES
SUGGESTED TANK
PRESSURE
TIPS
ATV
16-650-8
22-11-8
25-12-9
24-9-11
40 psi (2.7 bar)
Fit on stand with stand in
highest position. Can be
fitted with the valve at the
bottom.
Lawn Tractor 16-650-8
23-1050-12
26-12-12
40-50 psi
(2.7-3.4 bar)
Use the stand in the
highest position.
Car
13 in. rims
14 in. rims
50-60 psi
(3.4-4.1 bar)
If difficult, lean the rim
against the stand instead of
placing it on the stand.
Ensure the valve is
covered. Lubricate well.
4x4
15 in. rims
16 in. rims
60-80 psi
(4.1-5.4 bar)
Fit in vertical position.
Lubricate well. Ensure the
valve is covered by the tire.
Truck
11-22-5
18-22-5
100 psi (6.8 bar)
120 psi (8.2 bar)
Can be fitted vertically,
such as still on the truck.
Rotate the tire bead seater
barrel to the correct
position. If using a stand,
place it in the lowest
position.
Tractor
Up to 28 in.
Over 28 in.
100 120 psi (8.2 bar)
psi (6.8 bar)
Fit horizontally. Place the
bottom bead on the rim.
Use the tire wedge.
Large Tractor Terra Tries
48-31-20
66-43-25
120 psi (8.2 bar)
Fit vertically. Roll the tire
until the back bead is in
position.
