Powerfinn PAC 600 Installation And User Manual Download Page 5

Car use: Always refer to the user manual of the car before connecting 
the charger to the car battery (see step 2) and removing it after finishing 
charging   (see   step   5).  The   battery   terminal  not  connected   to   the   car 
chassis has to be connected first. The other connection is to be made to 
the   chassis   far   away   from   fuel   lines   and   from   the   fuel   induction   i.e. 
carburetor.  After finishing charging, unplug the charger from the mains 
before removing the charger cables.

Safety 
Instructions

In addition to the safety measures mentioned under ‘Installation’ (page 
3),   the   following   personal   precautions   should   be   taken   whenever 
charging batteries.

1. For emergency situations ensure in advance that help is available in 

time of need.

2. Batteries contain acid that is harmful to the eyes, skin and clothes. 

Always wear overalls and safety goggles. Never touch the eyes with 
unwashed hands after handling batteries.

3.

Ensure that a working, fresh water tap is available. If acid gets into 
the   eyes  or   on   the   skin, immediately rinse  the  area  with   plenty  of 
water for several minutes. If visible injury occurs, contact a physician 
immediately. In case of eye injuries, always contact a physician.

4. The   charging   process   generates   explosive   hydrogen   gas.   Do   not 

smoke or otherwise bring burning or sparking matter to the vicinity of 
the charger when it is in operation.

5. If a short circuit occurs, the battery may explode or the item causing 

the short may melt. Keep the work area clear from tools and debris. 
Remove jewelry, watches etcetera before working with the battery.

6. The   power   cord   should   be   unplugged   and   the   battery   must   be 

disconnected from the charger in case the equipment is left unused 
for a longer period of time.

7. The charger must be situated away from heat sources like radiators  

and heat registers and in such a way that no objects can fall or liquid  
can be spilled into the cabinet openings.

8. Never attempt to recharge non-rechargeable batteries.

9. This  device   is not meant  to   be   used   by  children  or  people  whose 

physical,   sensory   or   mental   attributes   or   lack   of   experience   and 
knowledge   prevent   them   from   using   the   device   safely   unless   a 
person responsible for their safety supervises them or has instructed 
them how to use the device.

5

Summary of Contents for PAC 600









Reviews: