5
Maintenance Schedule
Operating Hours
Item
Action needed
500
2500
5000
10,000
15,000
20,000
Remarks
Tank
Drain moisture
Daily
Inlet air filter
Replace
(Every 2,500 hrs or less)
Part #91348550
Blower fan
Clean
Fan Duct
Clean
Compressor Fins
Clean
(Every 2,500 hrs or less)
Bearings
Grease
Service Center Only
Tip seal
Replace
Dust seal
Replace
V-belt
Inspect, replace
*Note 3
Pressure Switch
Confirm operation
Magnetic starter
Inspect
Replace if contact
points deteriorated
Safety valve
Confirm operation
(Every 2,500 hrs or less)
Pressure gauge
Inspect
(Every 2,500 hrs or less)
Inspect
Replace
NOTES:
1. Inspect and perform maintenance periodically according to maintenance schedule.
2. The maintenance schedule relates to the normal operating conditions. If the circumstances and load condition are adverse,
shorten the cycle time and do maintenance accordingly.
3. * The tension of the V-belt should be adjusted during the initial stage and inspected every 2,500 hours afterwards. Proper
belt tension for 3 HP units is 7 lbs./.16” deflection; for 5 HP units, 7 lbs./.19” deflection.
4. See Compressor Pump Manuals for replacement or service procedures.
Scroll Air Compressors Tankmount/Basemount
