background image

PMAC Air Compressor

Powerex  

  100 Mundy Memorial Drive  

  Mt. Juliet, TN  37122  

  USA

P   1.888.769.7979  

  F   513.367.3125  

  www.powerexinc.com

IN598601AV  

  01/2020

Page 12 of 12

warrants that such replacement parts will be free from Defects for the first twelve (12) months from the date of shipment by Powerex. For 

other replacement parts besides motors, Air-End or Vacuum Pumps installed on a system or unit that was not manufactured by Powerex after 

any initial warranty period has expired or where another warranty does not apply for any reason, Powerex warrants that such replacement 

parts will be free from Defects for the first twelve (12) months from the date of shipment by Powerex. For other replacement parts besides 

motors, Air-End or Vacuum Pumps installed on a system or unit that was not manufactured by Powerex after any initial warranty period has 

expired or where another warranty does not apply for any reason, Powerex makes no warranties. Supplier’s repair or replacement of any 

Product shall not extend the period of any warranty of any Product. This warranty applies to the exchange of part(s) found to be defective by 

an Authorized Powerex Service Representative only. 

(g) Coverage. 

The warranty provided herein applies to Powerex manufactured units or systems only.

(h) Exceptions. 

Notwithstanding anything to the contrary herein, Powerex shall have no warranty obligations with respect to Products: 

(i) 

That have not been installed in accordance with Powerex’s written specifications and instructions;

(ii) 

That have not been maintained in accordance with Powerex’s written instructions; 

(iii) 

That have been materially modified without the prior written approval of Powerex; or

(iv) 

That experience failures resulting from operation, either intentional or otherwise, in excess of rated capacities or in an otherwise im

-

proper manner.

The warranty provided herein shall not apply to: 

(i) 

any defects arising from corrosion, abrasion, use of insoluble lubricants, or negligent at

-

tendance to or faulty operation of the Products; 

(ii) 

ordinary wear and tear of the Products; or

 (iii) 

defects arising from abnormal conditions of 

temperature, dirt or corrosive matter;

 (iv) 

any OEM component which is shipped by Powerex with the original manufacturer’s warranty, which 

shall be the sole applicable warranty for such component.

Limitation of Liability. 

NOTWITHSTANDING ANYTHING TO THE CONTRARY HEREIN, TO THE EXTENT ALLOWABLE UNDER APPLICABLE LAW, 

UNDER NO CIRCUMSTANCES SHALL POWEREX BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTAL, PUNITIVE, SPECULATIVE OR INDIRECT LOSSES 

OR DAMAGES WHATSOEVER ARISING OUT OF OR IN ANY WAY RELATED TO ANY OF THE PRODUCTS OR GOODS SOLD OR AGREED TO BE SOLD 

BY POWEREX TO BUYER. TO THE EXTENT ALLOWABLE UNDER APPLICABLE LAW, POWEREX’S LIABILITY IN ALL EVENTS IS LIMITED TO, AND 

SHALL NOT EXCEED, THE PURCHASE PRICE PAID.

Warranty Disclaimer. 

Powerex has made a diligent effort to illustrate and describe the Products in its literature, including its Price Book, accu

-

rately; however, such illustrations and descriptions are for the sole purpose of identification, and do not express or imply a warranty that the 

Products are merchantable, or fit for a particular purpose, or that the Products will necessarily conform to the illustrations or descriptions.

Product Suitability. 

Many jurisdictions have codes and regulations governing sales, construction, installation, and/or use of Products for cer

-

tain purposes, which may vary from those in neighboring areas. While Powerex attempts to assure that its Products comply with such codes, 

it cannot guarantee compliance, and cannot be responsible for how the product is installed or used. Before purchase and use of a Product, 

please review the Product applications, and national and local codes and regulations, and be sure that the Product, installation, and use will 

comply with them.

Claims. 

Any non-warranty claims pertaining to the Products must be filed with Powerex within 6 months of the invoice date, or they will 

not be honored. Prices, discounts, and terms are subject to change without notice or as stipulated in specific Product quotations. Powerex 

shall not be liable for any delay or failure arising out of acts of the public enemy, fire, flood, or any disaster, labor trouble, riot or disorder, 

delay in the supply of materials or any other cause, whether similar or dissimilar, beyond the control of Company. All shipments are carefully 

inspected and counted before leaving the factory. Please inspect carefully any receipt of Products noting any discrepancy or damage on the 

carrier’s freight bill at the time of delivery. Discrepancies or damage which obviously occurred in transit are the carrier’s responsibility and 

related claims should be made promptly directly to the carrier. Returned Products will not be accepted without prior written authorization by 

Powerex and deductions from invoices for shortage or damage claims will not be allowed. 

UNLESS OTHERWISE AGREED TO IN WRITING, THE 

TERMS AND CONDITIONS CONTAINED IN THIS LIMITED WARRANTY WILL CONTROL IN ANY TRANSACTION WITH POWEREX. 

Any different or 

conflicting terms as may appear on any order form now or later submitted by the buyer will not control. All orders are subject to acceptance 

by Powerex.

Summary of Contents for PMAC













Reviews: