PRINTED IN CHINA A01-3713481-001
Four independently-controlled channels charge and
monitor each battery individually, charging it to its full
potential without risking overcharging.
Charge from any 5V/2A USB power source.
Individual LED lights to indicate charge status.
Conveniently charge with the included USB cable (AC
adapter NOT included).
Rapid Charge Current:
0.50A
Trickle Charge Current:
50mA
Supported Batteries:
1 to 4 AA / AAA NiMH
Microprocessor:
4 independent circuits
capable of charging batteries
simultaneously.
– dV termination method
Protection:
Short circuit and over-voltage
Charge Time:
120 to 300 Minutes
*
Input Voltage:
5V DC/2.0A
* Charge time will vary depending upon the brand, capacity,
and condition of batteries being charged.
CHARGING BATTERIES
NOTE ON NEW BATTERIES CHARGING:
It is highly recommended for brand new batteries to be
charged and left in the charger
overnight
for the first
charge to fully activate the batteries.
It is highly recommended to place batteries of the same
charge/discharge state together to prevent uneven
charging.
