HELPLINE No. U K / N. IRELAND 0870 7323023 • REP. IRELAND 1800 481005
WEB SUPPORT: www.servotool.nl
17
Charging the battery
Charging
Fig. G
The enclosed battery charger has been exclusively designed for loading
batteries of the PCC-1440.
•
Position the battery (7) in the battery charger (11) as indicated in the
illustration.
•
Plug in the battery charger. The red “fast charging” light (12) is then
illuminated
•
As soon as the green light (13) is illuminated, charging has finished and
the accumulator is ready for use
Only use the battery charger in a dry environment at a
temperature between 5 °C and 40 °C.
The battery provided is not charged. Before using it for the first time leave it
to charge for 1 - 2 hours in order for it to reach its full capacity. The total
capacity of the battery will be reached after it has been charged 4 - 5 times.
If the cordless hammer drill is not going to be used for a long
period of time, recharge the battery before storing. From time to
time recharge the battery for a short period of time, to prevent it
from running down. Store the battery separately in the plastic case.
11
7
13
12
HELPLINE No. U K / N. IRELAND 0870 7323023 • REP. IRELAND 1800 481005
WEB SUPPORT: www.servotool.nl
08
Safety instructions
f. Use the power tool, accessories and tool bits etc., in accordance with these
instructions and in the manner intended for the particular type of power
tool, taking into account the working conditions and the work to be
performed.
g. Damaged switches must be replaced at a customer service repair centre.
Do not use power tools that cannot be switched on and off.
h. Do not leave power tools unattended while they are switched on. Always
switch off the tool and wait until it has come to a full standstill before leaving.
i.
If the mains cable has been damaged, it must be replaced with a special
mains cable. These can be obtained from the manufacturer or the
manufacturer's customer service department.
5) Battery use and care
a. Ensure the switch is in the off position before inserting battery pack.
b. Recharge only with the charger provided by the manufacturer. A charger
that is suitable for one type of battery pack may create a risk of fire when
used with another battery pack.
c. Take care that there are no metal objects (nails, paper clips, coins, etc.) in
contact with the surface of the battery.
d. If you come into contact with acid from the battery, rinse it off with water
immediately. If acid gets into your eyes, rinse out your eyes at once with
water and contact a doctor immediately!
6) Service
a. Please use a qualified expert who uses original replacement parts to repair
your power tool.
b. Caution! The use of any accessories or additional tools other than those
recommended in this manual may lead to an increased risk of injury. Only
use original replacement parts.
