20
GB
Cleaning and maintenance
Wipe the multisander using a well-wrung
cloth after use, and always keep the surface
and ventilation holes free of dirt.
Never use corrosive or abrasive detergents,
as they may aff ect the plastic parts on the
multisander.
If the Velcro surface on the sanding pad
is damaged, it must be replaced. Remove
the fi ve screws under the Velcro. Fit a new
Velcro surface and replace the screws.
Declaration of compliance
We hereby declare, that
MULTISANDER
56001 (S1B-RF2-140x140x80)
230 V - 105 W
has been manufactured in accordance
with the following standards or normative
documents:
EN 60745-1:2003+A1:03
EN 60745-2-4:2003
EN 55014-1:2000/+A1:2001
EN 55014-2:1997/+A1:2001
EN 61000-3-2:2000
EN 61000-3-3:1995/+A1:2001
in accordance with the provisions of the
following directives
2006/95/EEC The Low Voltage Directive
2004/108/EEC The EMC Directive
2013
Stefan Schou
Business Unit Manager
05.02.2013 - HP Schou A/S, DK-6000 Kolding,
Denmark
Service centre
Note: Please quote the product model
number in connection with all inquiries.
The model number is shown on the front of
this manual and on the product rating plate.
For:
• Complaints
• Replacements parts
• Returns
• Guarantee issues
• Open weekdays from 07.00 to 17.00
(Fridays until 15.30)
• E-mail: [email protected]
