www.powerbox-systems.com
11
5.2 IN CONJUNCTION WITH THE POWERBOX ROYAL SR2 OR POWERBOX
COMPETITION SR2
Both these PowerBoxes feature a P²-BUS menu point. If you select this point, you
are asked to connect the P²-ServoBridge to the
DATA
output. The PowerBox now
reads out the menu, and you can carry out all the required adjustments using the
screen.
We included this feature in order to offer a quick, simple method of setting up the
ServoBridge - regardless of the radio control system you are using.
You can now connect the ServoBridge to one of the P²-BUS outputs on the
PowerBox
Royal SR2.
5.3 IN CONJUNCTION WITH A JETI TRANSMITTER WITH EX-BUS
You can use the JetiBox menu to set up the
P²-ServoBridge for use with a PowerBox
Royal
SR2, or for operation at one of your receiver’s
EX-BUS outputs. This is accomplished by
connecting the P²-ServoBridge to an EX-BUS
output on your receiver, where you can access
MX to set the output channel and the fuse.
However, the Jeti system only allows the
connection of one P²-ServoBridge to each EX-
BUS output at the receiver! Since the EX-BUS
does not feature sensor addressing, it is not possible to implement arrangements
such as Y-lead distribution - as is possible with the P²-BUS.
Please note that changing the output channel alters the ID of every ServoBridge.
For example, it is possible to connect two P²-ServoBridges to two of the receiver’s
EX-BUS outputs, and receive telemetry data from both of them.
