www.powerbox-systems.com
9
use, then it is a safe assumption that the load connected to it is too great. You can
usually improve the situation by installing the
DigiSwitch
in a position where the
cooling airflow is better, and also by reducing any stiffness in the control surfaces
or mechanical linkages. If none of these measures eliminates the problem, you
should replace the unit with a
PowerBox Sensor
, as this product is designed for
higher currents. We will be glad to advise you on such matters.
SmartSwitch:
The
SmartSwitch
requires no cooling in operation. The switching capacity is more
than 20 A, and in practice the limiting factor is the connecting cable.
As already mentioned, the
SmartSwitch
is not fitted with a voltage regulator, and
for this reason it does not constitute a means of operating standard 6 V servos
with LiPo batteries.
