27
Operation
3.3.2
Accelerating
When the engine is running:
1. Release the parking brake: Move the
lever (Fig.
11/1) at the top right of the
handlebar (Fig.
11/3) forwards.
2. Use your fingers to pull the drive bar
(Fig.
11/2) against the handlebar
(Fig.
11/3).
3. Steer the machine with the handle-
bar (Fig.
11/3) in the required direc-
tion.
Fig.
11
3.3.3 Stopping
1. Release the drive bar (Fig.
11/2).
The machine decelerates and
comes to a stop.
2. Actuate the parking brake: Move the
lever (Fig.
11/1) at the top right of the
handlebar (Fig.
11/3) back.
Do not park the machine on
carpets while the engine is run-
ning. Risk of fire through the
flooring overheating due to the
rotating rotary brush!
Exception: The machine is
equipped with a carpet kit (op-
tion) which automatically
switches the rotary brush off
when stopping the machine.
3.3.4
Vacuumsweeping
Ensure sufficient ventilation
when sweeping indoors!
It is forbidden to sweep up
dust which represents a health
hazard!
1. Check the machine,
refer to paragraph 2.2.
2. Open the bypass flap if damp waste
is to be cleared up.
3. Switch the machine on,
refer to paragraph 3.3.1.
The engine and sweeping functions
are activated.
Drive away immediately after
switching on the machine oth-
erwise it is possible that marks
will be produced on the floor by
the rotating rotary brush.
2
3
1
