PowerBoss Admiral 28, User Manual

Page: 7 / 52

7
The Admiral 28/32
This machine was designed with total opera-
tor comfort and ease of use in mind. All ma-
chine components have been designed as a
total system to efficiently clean dirty floors.
The Admiral has four available scrub head
types and sizes to fit specific applications.
Please contact your PowerBoss representa-
tive for specific recommendations for the
correct scrub head type, size, and brush type
and chemical applications.
Before using the machine, always perform
the following steps to ensure proper machine
operation.
•
Check under the machine for leaks.
•
Check the rear and side squeegees for
wear and damage.
•
Check the steering for proper operation.
•
Check the solution and recovery tanks.
After using the machine, always perform the
following steps:
•
Check the battery charge level. Charge bat-
teries if necessary. When charging batteries,
extra precaution is required:
ƒ
Battery acid can cause burns.
ƒ
When working on or around batteries, al-
ways wear protective clothing and safety
glasses.
ƒ
Remove metal jewelry. Do not lay tools or
metal objects on top of the batteries.
ƒ
Charging batteries generate explosive gas-
ses.
DO NOT CHARGE BATTERIES WHEN
OPEN FLAMES OR SPARKS ARE
PRESENT. DO NOT SMOKE.
ƒ
Make sure the charger is turned off before
disconnecting it from the batteries.
ƒ
Charge the batteries in a well-ventilated ar-
ea.
ƒ
Fluid levels should be checked before and
after charging and maintained at the proper
levels. If low, add water until the metal plates
are covered.
ƒ
If the machine is not used for an extended
period of time, batteries should be kept fully
charged with a boost charge once a week.
•
Check for wire, string, or twine wrapped
around the scrub brushes.
•
Check the squeegees for wear and dam-
age.
•
Check the rear squeegee suction hose and
off-aisle wand hose for obstructions.
•
Empty and clean the debris box (cylindrical
systems only).
•
Drain and clean the recovery tank.
•
Check under the machine for leaks.
•
Check the service records to determine
maintenance requirements.
WARNING!
•
Be sure you understand the machine
controls and their functions.
•
While on ramps or inclines, avoid sud-
den stops when tanks are filled.
•
Avoid abrupt sharp turns. Slow down
driving speed when going downhill.
•
Always drive up when cleaning ramps.