Monitor Series PB# 4100031 Rev.B 09/11
PowerBoss, Inc. Copyright 2011
Page 61
Cylindrical Sweep/Scrub Brush Height Adjustment
1. Turn the machine off and lock the parking
brake.
2. Press the cylindrical scrub brush switch to the
on position.
NOTE: The adjustment knob is located in the
engine compartment on the broom rod
pivot.
3. Turn the broom adjusting knob clockwise one-
eighth turn to free the wing nut.
4. Turn the wing nut counter-clockwise to allow
space for adjustment.
5. Make a lower or higher adjustment with the
knob as required.
6. Retighten the wing nut.
7. Repeat the cylindrical sweep/scrub brush
pattern check to see that the broom is properly
adjusted.
PREVENTATIVE MAINTENANCE