13
www.powerboozt.com
EN
External fuses in battery cable defective.
Replace the fuses (only equivalent
values)
Input voltage below the minimal value.
Battery voltage too low or battery
defective.
Input voltage higher than the maximum
value.
-
Check if the system-voltage
matches with the inverter.
-
Check the system on DC power
supplies that give a too high voltage.
Internal defect
When after checking the total system
the inverter still doesn’t work, it can
be send back for repair.
Connected equipment gives
disturbance.
‘Ground’ not connected
Connect the ‘ground’ connection of
the inverter to the chassis of the
vehicle or the minus.
Cabling is against the housing of the
inverter.
Make sure that the cables do not
touch the housing of the inverter.
8.
Accessories
RRC80
Plug and play remote control with:
On/off switch
RRC80-L
Plug and play remote control with:
On/ off switch; working status LCD and error display
(Only suitable for Rhino without LCD)
RRC80-W
Wireless remote controller, on/off switch
