5
SPECIFICATIONS FOR “PS THIN” SERIES SPEAKER SYSTEM
(Due to Constant Improvements, Specifications and Parameters are subject to change without notice.)
Model
Size
System
Imped-
ance
Frequency
Response
Sensitivity
1W/1M
Magnet
Size
Voice
Coil
Dia.
Power RMS/
Peak
PS-WB110T
Single 10”
4-ohm
38Hz-280Hz
90dB
40 oz.
2.0”
275W/550W
PS-WB112T
Single 12”
4-ohm
36Hz-250Hz
91dB
40 oz.
2.0”
300W/600W
UNPACKING THE ENCLOSURE AIR SUSPENSION
Every attempt has been made to transport your new PowerBass Air Suspension Subwoofer system safely.
Carefully unpack the enclosure and inspect it thoroughly for any damage that may have occurred during
shipping. Notify your local PowerBass dealer immediately should you notice any damage prior to installing
the unit. Be sure to keep the carton and packing material until your system is operational. The original
boxes will do the best job of protecting your speaker system if they need to be transported.
INSTALLATION EXPERIENCE
Installation of PowerBass Autosound Speakers requires experience with a variety of mechanical and elec-
trical procedures. This manual only provides general installation and operating instructions. If you have
any reservations about your installation skills or lack the proper tools, please contact your local PowerBass
Autosound dealer for assistance.
ENCLOSURE PLACEMENT RECOMMENDATIONS
Your PowerBass Air Suspension Subwoofer system accurately reproduces the lowest portion of the audible
frequency range, which is generally considered to be non-directional. As such, the placement within the
vehicle is not as critical to achieve good sound reproduction as with full range systems. Typical locations
include behind or under the seat in a pick up truck, coupe or wherever space is limited.
Use the mounting brackets snd hardware supplied to secure the enclosure to the vehicle.
WARNING: Permanent mounting is not only the safest installation, but usually produces the
best sound quality. This custom enclosure is heavy and has a smooth surface finish, which
may slide around during aggressive driving, sudden stops or road vibration. To avoid ve-
hicle damage or personal injury please ensure that the enclosure is securely mounted to a
surface with adequate strength and rigidity to support it.
Summary of Contents for PS-WB110T
Page 2: ......
