CONTROL PANEL LAYOUT
1. Line INPUT (RCA) Jacks
These RCA style input jacks are for use with source units that have RCA line level outputs. A source unit
with a minimum output of 200mV is required for proper operation. However, this input will accept levels up
to 6Vrms.
2. Line OUTPUT (RCA) Jacks
RCA style pass through output jacks allow for a signal to be sent to other amplifiers in a daisy-chain
configuration. Only one Remote Bass Control can be used when multiple bass amplifiers are connected.
3. GAIN Control
This control is used to match the input sensitivity of the amplifier to the particular source unit that you are
using up to 6 volts.
Fig.2 Panel Layout
