3
2-CHANNEL LOC / LINE DRIVER FEATURES
2-Channel LOC:
Line Output Converter electronically adjusts high level speaker outputs to low level RCA
outputs. Necessary when integrating OEM (factory) radios with aftermarket amplifiers and speakers.
Auto Turn On Sensing Circuit:
Picks up the voltage from the High or Low level inputs thus eliminating
the need to hard wire the remote input.
Selectable High/Low Input:
Allows you to use either a high level (speaker) input or low level (RCA) input.
Variable Gain:
Matches the output level from the radio to the LOC for maximum signal.
LED Clipping Indicator:
An Orange LED gives you visual confirmation when setting the Gain control
RCA Low Level Output:
Tiffany style right and left RCA jacks for maximum signal transfer.
13Vrms Output:
As a line driver the ALC-2 can boost the output voltage of the radio (head unit) up to 13
volts before delivering it to the amplifier inputs.
Compact Size:
Thanks to the extensive use of Surface Mount Devices the ACL-2 can be mounted under
dash, behind the dash or virtually anywhere.
Additional Features:
Mounting brackets, hardware and plug-in connectors for easy pre-wiring.
ALC-2 SPECIFICATIONS
Maximum Input Power (High Level): 100 watts
Maximum Input Voltage (Low Level): 9.5 volts
Maximum Output Voltage: 13 volts
Frequency Response: 10Hz-/-3dB
Total Harmonic Distortion: <0.4%
Signal to Noise Ratio: 94dB
Low Level Input Impedance: >20,000 ohms
High Level Input Impedance: >180 ohms
Output Impedance: <100 ohms
Power Supply: PWM DC/DC
Current Draw: 150mA
Recommended Fuse: 1-amp
Chassis Measurements (W x L x H): 4.4" x 2.3" x 1.1" (111mm x 58mm x 28mm)
Due to continuing improvements these specifications are subject to change without any notice
.
