PowerBass Xtreme Component Tweeter
These high quality tweeters come complete with several mounting housings for installation versatil-
ity. Experiment with the tweeter positioned in several locations to determine the best imaging result
before cutting out any panel. Typically tweeters should be mounted on axis and as close to ear level
as possible. Once a suitable location has been found then you can evaluate your mounting options
shown on the next page.
2XL COMPONENT TWEETER SPECIFICATIONS
DOME
SIZE (25mm)
MOUNTING
(DIAMETER)
NOMINAL
IMPEDANCE
FREQUENCY
RESPONE
SENSITIVITY
(1M / 1M)
MOUNTING
(DEPTH)
POWER
(RMS/PEAK)
1.0” SILK
1 7/8”
4
Ω
3.5K-21Khz
92 dB
7/8”
60/120
INSTALLATION PROCEDURES
By mounting the tweeter separately from the woofer (or mid-range driver) the installer can choose
the best location for sound quality and imaging. Optimum results are usually obtained by locating
the tweeters and midrange speakers relatively close to each other, and by keeping the sound path
lengths between the listener and the left and right speakers as equal as possible. Three mounting
types are possible allowing more versatility for the tweeter location. These are flush mount, surface
mount, and angle mount.
Flush Mounting (Type A)
The best location for the tweeter is usually high up on the door and as far forward as possible
without interference from the dashboard. If the desired location is flat and space behind the door
panel allows the use of the flush mount housing, follow the drawing as shown below:
