24
IMPORTANT!
Always wear work gloves when engaging in any
maintenance work.
Only replace the blade with a genuine replacement blade, as this will
ensure top performance and safety under all conditions.
Blade maintenance
WARNING!
If the blade is blunt, it can be sharpened in a
specialised workshop. If the blade is damaged or showing signs of
imbalance, it must be replaced.
Carry out the following steps to change the blade:
1. Turn the mower over and rest it carefully on its side.
2. Use sturdy gloves and hold the blade firmly. Turn the blade nut (19)
anticlockwise to remove the blade (20) (Fig. 17).
3. Install the new blade in the reverse order. Ensure that the blade is
positioned correctly and the screw tightened firmly.
4.Tighten the fastening bolt. The tightening torque should be approx. 25 Nm.
19
20
Fig. 17