background image

Installation Instructions. Read Me! 

1.  DISCONNECT NEGATIVE (-) BATTERY CABLE. 

2.  Remove air intake hose assembly. 

3.  Remove throttle body air intake box and save bolts. 

4.  Remove (3) bolts from the throttle body. 

5.  Unclip throttle & cruise cables and remove from manifold and throttle lever. 

6.  Install power plate using (3) 6mm x 50mm bolts and 6mm flat washers. 

(Ref. “A”)

 

7.  Install throttle & cruise cable bracket and tighten bolts. 

(Ref. “B”)

 

8.  Install both throttle & cruise cables thru reinforcement ring of throttle cable bracket. 

 

A. 

Reattach cables to thr ottle body lever . *Fir st cr uise cable then thr ottle cable 

 

B. 

Slide and lock both plastic cable r etainer s into slot separ ately. 

9.    Locate (1) long extension plate using (1) flat head screw to reposition throttle body intake box using saved 

bolts 

(Ref. “D” and Step 3) 

10. 

Locate (1) short extension plate with 5/8” thick spacer using (1) flat head screw to reposition throttle body 

intake box using saved bolts. 

(Ref. “C” and Step 3) 

11.  Install air box support bracket using (1) flat head screw & (1) flange nut. 

(Ref. “E”)

 

12.  Inspect & Test throttle linkage for full Open & Closed travel before driving. Some cruise and kick down ca-

bles may require adjustment. Please refer to your vehicles service manual for proper adjustment. 

13.  Reinstall throttle body air intake assembly using 

(Step 2) 

as an example. 

14.  Reconnect battery cable. Enjoy! 

 

The sound of power...The “whistle” means its working!

 

ASSEMBLY DETAIL (Ref. “B”) 

Bracket 

(2) Spacers 

Nut-

Ref. “A”-   

(1) Power  Plate 

 

   (1) “O” ring 

 

   (3) 6mm x 50mm Bolts 

Ref. “B”-   

(1) Thr ottle Cable Br acket 

 

   (2) .636 long w/ 3/8” hole spacers 

 

   (2) 3/8-16” x 1 1/2” bolts 

 

   (1) Nutplate 

Ref. “C”-   

(1) 1/2” Extension Plate 

 

   (1) 6mm x 34mm Flat head screw 

 

   (1) 5/8” w/ 1/4” hole spacer 

Ref. “D”-   

(1) 1” Extension Plate 

 

   (1) 6mm x 20mm Flat head screw 

Ref. “E”-   

(1) Air  box flange nut 

 

   (1) Air box support plate 

 

   (1) 5/16” x 1 1/2” flat head screw 

 
AIR-I30563B 
Rev.  12.21.16 

Airaid.  1815 West Crest Lane. Phoenix AZ 85027  (800) 498-6951 

[email protected]

   www.airaid.com 

Reviews: