PowerA MOGA, User Manual

Page: 5 / 24

Setup
Install MOGA Pivot App
1.
MOGA Pivot App must be downloaded prior to
gameplay. Download the MOGA Pivot App from Google
Play by visiting
PowerA.com/MOGAPivotApp
or by
scanning the QR Code provided in this manual or on the
adjustable MOGA Arm
™ of your MOGA Controller.
nOTE:
You may need to have a QR Code scanner app
installed on your mobile device.
2.
Once the app download is complete, launch the MOGA
Pivot Application, you will now be ready to start the
guided pairing sequence with your MOGA Controller.
Install Batteries and Turn on MOGA Controller
3. Insert 2 new (1.5v) AAA alkaline batteries into the two
battery compartments on the bottom of your MOGA
Controller (see Figure 4). Make certain that the Battery
Compartment covers are firmly in place. To turn the
controller “ON” or “OFF”, flip up the MOGA Arm
™ to
find ON/OFF switch and slide to the appropriate position
(see Figure 2).
4. Install your Mobile device. The MOGA Arm ™ extends to
hold devices up to 3.2 in./82mm firmly during gameplay.
Questions? PowerA.com/MOGA
5 . The first time you power your MOGA “ON” you will
be in “Pairing” mode, which is indicated by a Flashing
Blue LED.
Pair MOGA with Mobile Device
6. With the MOGA Powered “ON” and the Pivot App
launched the Pivot App will take you step by step through
the entire pairing procedure. If your mobile device’s
Bluetooth is turned “OFF” the MOGA app will request to
turn your device’s Bluetooth “ON”. Pairing mode lasts for
up to 180 seconds, after which MOGA enters a “sleep
mode” to save energy. To re-enter pairing mode hold the
PowerA button for 3 seconds, or slide the main power
switch to “OFF” and then back to “ON”.