Problem
Possible Causes
Possible Solutions
Output
pressure
varies
Not enough water supply.
Check water supply hose for kinks,
leaks, or blockage. Open faucet all
the way.
Water inlet screen is clogged.
Nozzle is clogged.
Clean Nozzle (See “Cleaning
Remove and clean filter screen.
Nozzle” on Page 20).
Nozzle has mineral build up
Remove Nozzle and clean with
vinegar.
Water
or Oil
Leaking at
Pump
Loose connections.
Check and tighten all connections.
Worn or broken O-rings.
Call customer service at:
1-855-888-3598.
Pump head or tubes damaged from
freezing.
No
intake of
detergent
Detergent hose not properly
inserted into unit.
Soap injector hose cracked or split.
Replace hose.
Push firmly onto injector fitting.
Wrong Nozzle.
Injector turned off.
Switch to black SOAP nozzle.
Turn on injector
Injection hose strainer clogged
Clean hose and strainer.
Nozzle blocked.
Clean nozzle.
Dried detergent in injector.
Dissolve by running warm water
through the injection hose. Run
clean water through injector until
clear.
Water
leaking
at spray
gun/wand
connection
Loose hose connection.
Check and tighten all connections.
Worn, broken or missing O-ring.
Call customer service at:
1-855-888-3598.
FOR TECHNICAL QUESTIONS, PLEASE CALL 1-855-888-3598
MAINTENANCE
28
Trouble Shooting Continued
