SET UP
10
ASSEMBLY
1.
See Figure A.
Figure A
Figure B
FOR TECHNICAL QUESTIONS, PLEASE CALL 1-855-888-3598
3. Connect the Pressure Hose to the Pump
RXWOHW¿WWLQJDQGWLJKWHQWKHQXW¿UPO\E\
hand, DO NOT use any tool to tighten.
See Figure C
.
Figure C
4. Connect the Pressure Hose to the
handle of the Spray Gun and tighten the
QXW¿UPO\E\KDQG
See Figure D.
Figure D
5. Remove the protective cap on the Wand
Wand
Spray gun tip
inlet. Insert the Wand into the Spray Gun
WLSDQGWLJKWHQWKHQXW¿UPO\E\KDQG
See Figure E..
Figure E
Take out the End Cap in the Frame,attach
the Handle on to the Frame by inserting
the clip.
2.Attach the hose Holder to the Panel.
See Figure B.
