Assembly
20
Note: The left and right grips are not interchangeable!
The hole in the left grip is smaller than the hole in the
right grip.
• Fit the left grip on the end of the left handlebar.
Hint: If it is difficult to slide the grip onto the handlebar,
moisten the inside of the grip with water.
40
Left Handlebar
Left Grip
• Slide the remaining front/rear axle through the left shock,
the large wheel and out through the right shock.
• Fit a .437 cap nut onto the end of the front/rear axle.
• Tap the cap nut with a hammer to secure the cap nut
on the front/rear axle. Pull on the cap nut to be sure it
is secure.
Hint: You may need the help of another adult to support the
other end of the front/rear axle while you tap the cap nut.
39
.437 Cap Nut
Front/Rear Axle
.437"
.437 Cap Nut
• Insert a #8 x
3
/
4
" screw through the right shock to secure
it to the right fork.
• Tighten the screw with a Phillips screwdriver.
Do not over-tighten.
37
• Fit the other large wheel (with hex bushings) between
the shocks.
38
Large Wheel
(with Hex Bushings)
Left Shock
Right Shock
Right Shock
Small
Hole
