11
Assembly
• Turn the monoshock so the bottom fits into the axle guides
inside the frame.
• Lift the moveable top piece of the vehicle frame.
Narrow End
of Monoshock
Rear of
Vehicle Frame
Hole
7
Top View
Monoshock
Axle Guide
Axle Guide
8
Top View
6
Right Side View
Lift
.437 Cap Nut
Lower Shock Rod
Moveable
Top Piece
• Place a .437 cap nut on a flat surface, inside up,
as shown.
Hint: You may want to place a scrap block of wood
underneath the cap nut to protect the assembly surface.
• Fit the lower shock rod into the cap nut.
• Tap the opposite end of the lower shock rod with a
hammer to secure the cap nut on the lower shock rod.
Pull on the cap nut to be sure it is secure.
5
.437"
.437 Cap Nut
Note: The illustration above does not show the moveable
top piece of the vehicle frame.
• Insert the narrow end of the monoshock into the hole in
the top of the frame, as shown.
