Assembly
26
• Once you have selected the appropriate seat position
and inserted the seat tabs into the slots in the vehicle
body, align the holes in the back of the seat with the
holes in the vehicle body.
• Insert three #8 x
3
/
4
" screws through the holes in the
seat and into the vehicle body. Tighten the screws
using a Phillips screwdriver. Do not over-tighten.
Vehicle
Body
Seat
15
• Fit the gas cap into the hole in the side of the
vehicle body.
Gas Cap
Vehicle Body
27
IMPORTANT! The seat can be assembled in either of two
positions for your child's comfort.
• Position the seat upright.
• Fit the three tabs on the front of the seat into either the
first or second set of square openings in the vehicle
body. Seat your child in the vehicle and check your
child's foot to pedal distance to select the proper seat
position for your child. Reposition the seat, if necessary.
25
Second
Position
First Position
Seat
• Insert the fastener end of a long seat belt strap through a
slot in the center of the seat. Make sure that the fastener
faces the outer edge of the seat.
• Pull the long seat belt strap completely through the slot
until the T-loop at the opposite end of the belt catches
against the slot. (You will pull one T-loop through the slot.)
• Repeat this procedure to assemble the other long seat
belt strap to the seat.
Long Seat
Belt Strap
Fastener
Slots
24
End T-Loop
