1
1
0
1
030352
18
Troubleshooting • Solución de problemas • Guide de dépannage
service.fi sher-price.com
x2
ASSEMBLY MONTAJE ASSEMBLAGE
x1
x
Pin
Pin
Clavija
Clavija
Tige
Tige
32
• Press down on the steering wheel while grasping the steering column
under the dash. Pull the steering column up as far as it will go.
• Insert the 0,4 cm x 3,8 cm pin through the hole in the steering column.
• Grasp the steering column again and pull down to fit the pin into the
center of the steering wheel.
• Presionar hacia abajo el volante mientras sujeta la columna de mando
abajo del tablero. Jalar hacia arriba la columna de mando lo
máximo posible.
• Insertar la clavija de 0,4 cm x 3,8 cm en el orificio de la columna
de mando.
• Volver a sujetar la columna de mando y jalarla hacia abajo para ajustar
la clavija en el centro del volante.
• Appuyer sur le volant tout en tenant la colonne de direction sous
le tableau de bord. Faire glisser la colonne de direction vers le haut
jusqu’à ce qu’elle s’arrête.
• Insérer la tige de 0,4 cm x 3,8 cm dans le trou de la colonne
de direction.
• Tenir la colonne de direction de nouveau et la tirer vers le bas de sorte
que la tige entre dans le centre du volant.
Steering Wheel Cap
Steering Wheel Cap
Tapa del volante
Tapa del volante
Garniture du volant
Garniture du volant
33
• Fit the steering wheel cap onto the center of the steering wheel.
• Insert two, M4,5 x 1,9 cm screws into the steering wheel cap
and tighten.
• Ajustar la tapa del volante en el centro del volante.
• Insertar dos tornillos M4,5 x 1,9 cm en la tapa del volante
y apretarlos.
• Placer la garniture du volant au centre du volant.
• Insérer deux vis M4,5 de 1,9 cm dans la garniture du volant
les serrer.