8
L7820pr-0920
F
Charger
Connector
• Plug the charger connector into the battery
A
.
• Plug the charger into a standard wall outlet
B
.
Notes:
-
Use the charger only in a wall outlet. Do not plug the charger
into a ceiling outlet.
-
If power flow to the wall outlet is controlled by a switch, make
sure the switch is “ON”.
• The power indicator on the charger does not indicate the
charge status of your battery. The power indicator allows you
to see that there is power from the wall outlet to the charger.
• Before first-time use, charge the battery for
at least 18 hours.
Never charge the battery longer than 30 hours.
• Recharge the battery for at least 14 hours after each use of
your vehicle. Do not charge the battery longer than 30 hours.
• Once the battery is charged, pull firmly on the charger
connector to disconnect it from the battery. Unplug the
charger from the wall outlet. The battery is now ready to be
installed in your vehicle. Please see the Battery Installation
section on page 18 for detailed instructions on installing your
battery. If your battery is already installed in your vehicle,
simply re-connect the motor harness connector to the battery.
Lower and fasten the hood.
Dash
• Position the dash on the vehicle.
• Make sure the motor harness connector wire is through the
groove in the dash.
• Insert five #10 x
3
/
4
" screws into the dash tabs and tighten.
Motor
Harness
Connector
Wire
Children can be harmed by small parts,
sharp edges and sharp points in the vehicle's
unassembled state, or by electrical items.
Care should be taken in unpacking and
assembly of the vehicle. Children should not
handle parts, including the battery, or help in
assembly of the vehicle.
WARNING
1
ASSEMBLY
BATTERY CHARGING
E
A
B
F
Battery
FRONT VIEW
