L7820pr-0920
17
12
ASSEMBLY
F
L7820pr-0920
16
Spacers
Grille
• Fit two spacers
between
the grille and the back of the brush
guard, as shown
A
.
• Insert two #8 x 3" screws through the inside of the headlight, the
spacers and into the holes in the grille
B
. Tighten the screws.
Brush Guard
• Fit the light covers to the headlights.
• Insert a #10 x
3
/
4
" screw into each light cover. Tighten the screws.
Light
Covers
A
B
#8 x 3" Screws
Headlights
Brush Guard
Front Bumper
• Fit and hold the brush guard against the front bumper.
• Insert two #10 x
3
/
4
" screws into the brush guard and tighten.
15
• Position the windshield so that the molded detail on the
wipers faces the front
end of the vehicle.
• Insert and
“snap”
the two large tabs on the windshield into
the large slots in the dash.
• Pull up on the windshield to be sure it is secure.
Windshield
Wipers
Large
Tab
Large
Tab
Large Slots
14
