Proper label application will help to keep the labels
looking their best! When applying labels, keep the
following guidelines in mind:
• Wash your hands before applying the labels.
• Before applying the labels, wipe the surface of the
vehicle with a clean, dry cloth to remove any dust or oils.
• Place the labels exactly as shown in the illustrations.
• For best results, avoid repositioning a label once it has
been applied to the vehicle.
• After applying a label, rub the label firmly with a
clean, dry cloth to make sure the label is adhered
to your vehicle. Start at the center of a label, and
smooth towards the outer edges to remove
air bubbles.
Assembly
6
Dash
Key Assembly
Phone Cord
• Bend the end of the phone cord so that it forms a “T”.
• Insert the end of the phone cord through the square
opening in the dash pocket. Pull gently on the cord to
make sure it is secure in the dash.
• Place the phone in the dash pocket.
• Snap the key assembly into the dash.
T-End
Radio
Slots
Tab
Tab
5
• Fit the tabs on the radio into the slots in the dash.
• Insert two #8 x 1" screws through the holes in the top of
the radio and into the dash.
• Tighten the screws using a Phillips screwdriver.
Do not over-tighten.
15
3
7
8
26
25
2
4
12
22
Dash View
Dash View
Dash View
7
10
74340a-0921.qrk 12/8/00 12:50 PM Page 10
