40
Fig. 5-16 Measurement menu tree
5.4.5 The control menu
By pressing
on the menu of “Control”, the display
would enter the next control menu tree.
1) Start Battery Test: is one command to control the UPS
to do the battery test.
2) Clear EPO status: once EPO status is enabled, the
UPS output would be cut off. To recover to normal
status, first EPO connector should be closed, and enter
this menu to clear EPO status, then UPS would stop
alarm and recover to Bypass model. And UPS needs
be turned on by manual operation.
3) Reset Fault status: when fault occurs, UPS would keep
in Fault mode and alarm. To recover to normal status,
