Only trained, authorised operators should use this platform. All
operators must read and comply with the following Operating
Instructions and Safety Guidelines before using the Ecolift Wind
Rated (WR). This platform is designed for safe access to a maximum
working height of 4.2m for 1 tools (150kg safe working
load) and is for indoor or outdoor use.
Operating Instructions
1. This platform is for indoor or outdoor use.
2. Ensure floor is level up to a 3° slope and able to support the total
combined maximum load (150kg safe working load) and
machine weight (340kg) of 490kg total. The maximum wheel load is
245kg (2.4kN).
Pre-Operation Checks:
1. Visually inspect machine; check for signs of damage to structure
including castors, wheels, operating handle.
2. Position machine safely; ensure there are no overhead obstructions
or dangers.
3. Ensure ground conditions are suitable. The machine should be
used on hard, level surfaces up to 3° that will support machine and
safe working load.
4. Ensure castors are locked before entering platform.
5. Check operating handle is working correctly by stepping into
basket through gates, ensure gates are fully closed behind you;
gently pull handle knob towards you, release: handle knob
should spring back to prevent handle turning. Do not use machine
if handle knob is damaged or sticking.
6. Cordon off work area in accordance with guidelines.
7. Safe working load for the Ecolift WR is 1 person only plus tools
with a total of 150kg including person. Never exceed the
safe working load.
Standard Operation:
1. The Ecolift WR must only be used on hard surfaces not sloping
more than 3°. Ensure a person is available at ground level to assist
in case of emergency.
2. Position machine under application. Check for any overhead
obstructions or dangers.
3. Check spirit level on machine chassis to ensure machine is level up
to 3°. Do not use machine unless bubble remains within 3° circle.
4. To use the Ecolift WR, step into platform through gates. Ensure
gates are fully closed behind you. Gently pull operating handle
knob towards you; turn handle clockwise to elevate. Always
check for overhead obstructions or dangers. To stop elevation: stop
turning handle; release handle knob. Turn handle anti-clockwise
(counter-clockwise) to descend.
Never attempt to move the Ecolift WR when elevated
Emergency Operation:
In the event of having to recover an operator who is incapacitated:
1. Remove emergency operation tool located on chassis.
2. Follow instructions on Emergency Lowering Procedure
instruction label.
3. Allow platform to descend to the fully lowered position.
23
APPENDIX ‘B’ - OPERATING AND SAFETY INSTRUCTIONS FOR ECOLIFT WR
