FOLDING STAIRWAY
Caterpillar 854G Wheel Dozer
Section 1
Installation Drawings
Stair Set PS-24313
See Drawing Page 10
Pg. 9
PROCEDURE.
1.
With the Isolator Mounting Plate 24 303 bolted to the various bolting pads,
assemble the stair set, generally per Drg 23 859 (but with only one hydraulic
actuator).
2.
Re-fit handrails to the loader, if necessary using post base components per
Detail W. Attach the Bolting Block to the wall of the bumper in a location to
suit with a 6mm continuous fillet weld. Cut and bend the Post to suit. Observe
previously mentioned precautions when cutting, grinding or welding in the vicinity of
the fuel tank.
3.
Fit the hydraulic power unit to the loader in a suitable location and connect and
fasten the hydraulic hoses. Complete the wiring.
4.
Fit a manual latch release lanyard to suit.
NOTE
Follow all on-site/Mine lifting and safety procedures when installing
PSFS to Wheel Dozer